Xerox WorkCentre 7232 System Administrator Manual page 77

• Data Receive Time-Out - Enter the timeout period for receiving data from WSD
• Notification Delivery Time-Out - Enter the timeout period for notification delivery
• Maximum TTL - Enter a value for the maximum TTL between 1 and 10. Enter
• Maximum Number of Subscribers - Enter the maximum number for WSD clients
6.
Select [Apply] to reflect the new settings.
7.
Enter the user ID and passcode, and then select [OK].
NOTE: The default user ID is "11111" and the default passcode is "x-admin".
8.
When the reboot message appears, select [Reboot Machine].
Xerox WorkCentre 7232/7242 System Administration Guide
clients between 1 and 65535 seconds in 1 second increments.
to WSD clients between 1 and 60 seconds in 1 second increments.
the number of network for communicating with WSD clients through rooters.
between 10 and 100.
Using CWIS to Configure Settings on the Machine
67