Xerox WorkCentre 7232 System Administrator Manual page 204

17 Problem Solving
• Consult with the Network Information Service (NIS) administrator when setting up
the network parameters (IP address and other parameters) from a host running NIS.
When the machine is switched off
The following actions take place when the machine is switched off.
• When [Receiving Buffer - LPD] is set to [Spool to Memory]:
All print data spooled in machine memory, including the data currently being printed,
is deleted. There is no print data on the machine when the machine is subsequently
switched on.
However, if the machine is switched off immediately after a print request, the print
data may be stored on the client. In this case, the print request can be reissued when
the machine is subsequently turned on, and the print data is printed on the machine
in turn.
• When [Receiving Buffer - LPD] is set to [Spool to Hard Disk]:
All print data spooled on the machine hard disk, including the data currently being
printed, is retained. A print request can be reissued when the machine is
subsequently turned on, and the print data is printed on the machine in turn.
• When [Receiving Buffer - LPD] is set to [No Spooling]:
All print data in the receiving buffer, including the data currently being printed, is
deleted. There is no print data on the machine when the machine is subsequently
switched on.
However, if the machine is switched off immediately after a print request, the print
data may be stored on the client. In this case, the print request can be reissued when
the machine is subsequently turned on, and the print data is printed on the machine
in turn.
When printing
• When [Receiving Buffer - LPD] is set to [Spool to Hard Disk] or [Spool to Memory]:
Print data cannot be received if the print data size exceeds the available capacity of
the hard disk or memory allocation.
NOTE: If the print data exceeds the receiving buffer capacity, the client may retransmit
the same print data. In this case, stop the client and make sure that the client does not
transmit the print data.
• When [Receiving Buffer - LPD] is set to [No Spooling]:
Print requests cannot be received from a client if a print request from another client
is being processed.
• When the client IP address or computer name is changed:
When the client IP address or computer name is changed, the machine cannot
perform query processing and cancel processing. Turn the machine off and on with
the receiving buffer empty of print data.
NOTE: Stopping printing or forced deleting of print data in the machine receiving
buffer can be performed using the control panel.
194 Xerox WorkCentre 7232/7242 System Administration Guide