The Rear Ports
Port
1
Power
2
Power Switch
3
Reset
4
WPS
5
USIM
6
Ethernet
7
DSL
8
Wireless Antenna
9
3G Antenna
Connect it with the supplied power adapter.
Power ON/OFF switch.
Press for more than 5 seconds to restore the device to its default
mode.
By controlling the pressing time, users can achieve two different effects:
(1)WPS: Press less than 5 seconds until WPS LED flashes orange to
trigger WPS function. But if WPS service is disabled, this short time
press does nothing.
(2) Wireless ON/OFF button: Press over 5 seconds to switch on
wireless function and the Wireless/WPS LED will lit green. Press over 5
seconds again to disable wireless function and the Wireless/WPS LED
is off.
Insert a SIM card into this slot.
Warning: Before inserting or removing the SIM card, you must
disconnect the router from the power adapter.
Connect your computer to a LAN port using the included Ethernet
cable (with RJ-45 cable)
Ethernet port 4 can be used for EWAN
Connect the supplied RJ-11 cable to this port when connecting to the
ADSL/telephone network
Connect the detachable antenna for wireless connection.
Connect the detachable antennas to these two ports for 3G
connection.
Meaning
10