Device Management - Billion BiPAC 7800GZ(L) User Manual

Device Management

The Device Management advanced configuration settings allow you to control your router's
security options and device monitoring features.
Device Host Name
Host Name: Assign it a name.
HTTP Port: The default HTTP port number is 80, you can change it to another one.
(The Host Name cannot be used with one word only. There are two words should be
connected with a '.' at least.
Example:
Host Name: homegateway ==> Incorrect
Host Name: home.gateway or my.home.gateway ==> Correct)
Expire to auto-logout: Specify a duration for the system to log the user out of the configuration
session automatically.
Universal Plug and Play (UPnP)
UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with the
feature to control data transfer between devices. UPnP offers many advantages for users running
NAT routers through UPnP NAT Traversal, and on supported systems. By letting the application
control the required settings and removing the need for the user to control the advanced configuration
of their device will make tasks such as port forwarding become easier.
Both user's Operating System and its relevant applications must support UPnP in addition to the
router. Windows XP and Windows Me have a native built-in support for UPnP (when the component
is installed). Windows 98 users may have to install the Internet Connection Sharing client from
Windows XP in order to support UpnP feature. Windows 2000 does not support UPnP.
Disable: Check to inactivate the router's UPnP functionality.
Enable: Check to activate the router's UPnP functionality.
UPnP Port: Default setting is 2800. It is highly recommended for users to use this port value.
If this value conflicts with other ports that have been used, you are allowed to change the port
number.
Click Apply to confirm the settings.
162