Billion BiPAC 7800GZ(L) Quick Start Manual

3g/ wireless-g adsl2+ (vpn) firewall router
Hide thumbs Also See for BiPAC 7800GZ(L):

Advertisement

Quick Links

BiPAC 7800GZ(L)
3G/ Wireless-G ADSL2+
(VPN) Firewall Router
Quick Start Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BiPAC 7800GZ(L) and is the answer not in the manual?

Questions and answers

Summary of Contents for Billion BiPAC 7800GZ(L)

  • Page 1 BiPAC 7800GZ(L) 3G/ Wireless-G ADSL2+ (VPN) Firewall Router Quick Start Guide...
  • Page 2 Quick Start Guide...
  • Page 3: Package Contents

    Billion BiPAC 7800GZ(L) 3G/ Wireless-G ADSL2+ (VPN) Firewall Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE. IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE USER MANUAL ON CD-ROM.
  • Page 4: Hardware Overview

    Quick Start Guide Hardware Overview The Front LEDs Lit green when 3G service is ready. Blinking orange slowly when 3G signal is weak; When the device is booting, the blinking orange fast when 3G green light will be lit and the red signal is middle;...
  • Page 5: Hardware Connection

    Billion BiPAC 7800GZ(L) 3G/ Wireless-G ADSL2+ (VPN) Firewall Router Hardware Connection BiPAC 7800GZ(L) offers three modes to connect to the internet. Besides using ADSL, users can set EWAN (Ethernet port # 4) or 3G for internet connection. BiPAC 7800GZ(L) also allows Dual WAN connection: ADSL fail-over to 3G, EWAN fail-over to 3G, ADSL fail-over to EWAN, and counter likewise.
  • Page 6 Quick Start Guide ADSL fail-over to EWAN...
  • Page 7: Hardware Installation

    Billion BiPAC 7800GZ(L) 3G/ Wireless-G ADSL2+ (VPN) Firewall Router Hardware Installation 1. 3G Connection Slide the SIM card into the card slot of the device with the gold contact facing down. Make sure that the SIM card has been slid into the bottom of the slot with a click.
  • Page 8 Quick Start Guide 2. Power Connection Plug the supplied power adapter into the wall jack and the other side to the router. Please note that the plug type may differ according to country. Please make sure when press Power Switch the front LEDs will be lit or off. 3.
  • Page 9 Billion BiPAC 7800GZ(L) 3G/ Wireless-G ADSL2+ (VPN) Firewall Router 5. ADSL Connection Connect the supplied RJ-11 phone cable to the router’s ADSL port, and the other side to the phone jack on the wall. 6. Splitter/ Micro-filter Connection Splitter / Micro-filters are important for ADSL installation, they help ensure that...
  • Page 10 Quick Start Guide b) Micro-filter connection If the installation has several telephones or other analog devices then an internal micro-filter can be employed at each analog device. Make sure power on the device, Ethernet cable is connected to your PC and ADSL line is in sync.
  • Page 11 Billion BiPAC 7800GZ(L) 3G/ Wireless-G ADSL2+ (VPN) Firewall Router 1. None of the LEDs are on when you turn on the router. Check the connection between the adaptor and the router. If the error persists, you may have a hardware problem. In this case you should contact technical support.

This manual is also suitable for:

Bipac 7800gzж bipac 7800gzl

Table of Contents