7. If all information provided is valid and the device successfully connects to WAN, a dialog box will
appear to signify the completion of the WAN port setup. At this point you can either click Done
to finish the EZSO configuration or you can click Next to wireless to proceed to the wireless
configuration if you have.
8. Select Enable and enter the necessary information in the blanks provided for the Wireless LAN
setting if you would like to use this feature and then click Continue.
9. The system will save your new configuration and complete the setup.
10. Congratulations! You've completed the setup and are now ready to surf the Internet.
11. You can test the connection by clicking on the URL link provided. If the setup is successful you
will be redirected to website.
28