Table of Contents
Advertisement
External Port: This is the Port or Port Range that defines the application.
Direction: Determine whether the rule is for outgoing packets or for incoming packets.
Time Schedule: A self defined time period. You may specify a time schedule for your prioritization
policy. For setup and detail, refer to Time Schedule section.
Log: Select Enable for this option if you will like to capture the logs for this Packet filter policy.
Add: Click this button to add a new packet filter rule and the added rule will appear at the bottom
table.
Edit: Check Edit next to the item you wish to edit, and then change parameters as desired.
Complete it by press "Edit/Delete".
Delete: Check Delete next to the item you wish to delete, and press "Edit/Delete" to remove this
rule.
Reorder: Be aware that packet filtering parameters appear in priority order i.e. the first one takes
precedence over all other rules. There is a sort function next to the Rule Name column, you can
move the rule to higher or lower priority by clicking the Order arrow, and press "Reorder" to save
the new priority.
Creating a rule
Select or type a rule name, set other parameters as needed, then press Add. (two examples as
follows)
FTP:
122
Advertisement
Table of Contents
