Table of Contents
Advertisement
Wireless
Parameters
WLAN Service: Default setting is set to Enable. If you do not have any wireless, select Disable.
Time Schedule: A self defined time period. You may specify a time schedule for your prioritization
policy.
Here we provide two groups of Time Schedule setting. You can flexibly set the time you want the
wireless connection works.
If you select Always On in group1, then the group2 is disabled.
While if you select any other item from the group1 drop-down menu, the group2 will be activated.
Select the timeslot you want, then the wireless will work according to the time of the two time
schedule settings. That is to say you can flexibly set the time the wireless works.
For setup and detail, refer to Time Schedule section.
Mode: The default setting is 802.11b+g. From the drop-down manual, you can select 802.11b if
you have only 11b card. If you have only 11g card, select 802.11g.
ESSID: The ESSID is the unique name of a wireless access point (AP) used to distinguish one
from another. For security propose, change to a unique ID name which is already built into the
router wireless interface. It is case sensitive and must not exceed 32 characters. Make sure your
wireless clients have exactly the ESSID as the device in order to connect to your network.
72
Advertisement
Table of Contents
