Ethernet Mac Filter - Billion BiPAC 7800GZ(L) User Manual

Ethernet MAC Filter

A MAC (Media Access Control) address is the unique network hardware identifier for each PC on
your network's interface (i.e. its Network Interface Card or Ethernet card). Using your router's MAC
Address Filter function, you can configure the network to block specific machines from accessing
your LAN.
There are no pre-defined MAC address filter rules, you can add the filter rules to you're your
requirements.
The format of MAC address could be: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx.
Filter Action
Action: Select an action for MAC Filter. This feature is disabled by default. Check Allow or Block to
activate the filter.
Parameters
MAC Address: Enter the Ethernet MAC addresses you wish to have the filter rule applied.
Time Schedule: A self defined time period. You may specify a time schedule for your prioritization
policy. For setup and detail, refer to Time Schedule section.
125