3G Status - Billion BiPAC 7800GZ(L) User Manual

3G Status

Status: The current status of the 3G card. Click
Signal Strength: The signal strength bar indicates current 3G signal strength.
Network Name: The network name that the device is connected to.
Network Mode: The current operation mode in 3G card, it depends on service provider and card's
limitation. It may be UMTS(3G), GPRS, EDGE, or GSM .
Card Name: The name of the 3G card.
Card Firmware: The current firmware for the 3G card.
Current TX Bytes / Packets: The statistics of transmission, count for this call.
Current RX Bytes / Packets: The statistics of receive, count for this call.
Total TX Bytes / Packets: The statistics of transmission, count from system ready.
Total RX Bytes / Packets: The statistics of receive, count from system ready.
Total Connection Time: The statistics of the connection time since system is ready.
Amount used: the amount that have been used in 3G
Billing period: the remaining days before the billing terminated day.
Clear: Click Clear button to reset the statistics value of Total TX/RX.
to go to 3G configuration page.
Status
64