Billion BiPAC 7800GZ(L) User Manual page 143

Internal IP Address / External IP Address: This is used to classify the traffic of a specific range of
internal/external IP address(es). Input the range you want to classify. If only the first IP block is filled,
only that IP will be classified. If you leave these four fields empty, it means any classify IP address.
Internal Port: This is the Port Range that defines the ports allowed by the Remote/WAN to connect
to the application. Default is set from range 1 ~ 65535. It is recommended that only advance user is
to configure this feature.
External Port: This is the Port Range that defines the port of the application.
Time Schedule: A self defined time period. You may specify a time schedule for your QoS policy.
For setup and detail, refer to Time Schedule section.
Note: Make sure that the router(s) in the network backbone are capable to execute and check
the DSCP throughout the QoS network.
137