Table of Contents
Advertisement
Memory sending ______________________________
The fax normally uses direct sending to send your document, but you can send it with memory
sending (see below). In this case, the fax quickly scans the document into memory. Then it sends
the document from memory. This means you do not have to wait for the fax to finish sending
before you can retrieve your original document.
You can send up to 15 letter-size pages at a time with memory sending (based on ITU-T No.1
Chart, standard resolution).
n
If MEMORY FULL appears on the LCD during the scanning process, re-start sending the document
using direct sending (see p. 5-2).
1
Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and contrast (see p. 5-1).
2
Press [Function].
Press [Send Options].
3
Use [3] or [4] to select MEMORY TX.
Press [Start/Copy].
4
Dial the receiving party's fax number.
Use one of the dialing methods described in this chapter (see p. 5-2).
TEL=
3456xxxx
5
Press [Start/Copy] twice.
The fax scans the document into memory and begins sending.
5
5-3
Advertisement
Table of Contents
