Installation Space; Required Peripheral Space - Canon LBP 3370 User Manual

IMPORTANT
Do not install the printer in the following locations, as this may result in damage to the
printer.
- An environment where the temperature and/or humidity can change dramatically, or
where condensation occurs
- A poorly ventilated room (Ozone is generated by the printer in use, however, the
amount is too small to be harmful to the human body. However, if you are going to use
the printer for a long time in a poorly ventilated room or to perform a large amount of
printing, ventilate the room to keep the working environment comfortable.)
- A location near products that generate magnetic waves or electromagnetic waves
- In rooms such as laboratories where chemical reactions occur
- A place where salt content, corrosive gases such as ammonia, or toxic gases are
contained
- A platform that may warp from the weight of the printer and optional accessories, or the
printer is liable to sink (such as a carpet or mat)

Installation Space

Select an installation location where you can secure the following amounts of free
space around the printer, and a surface that can support the weight of the printer.
The dimensions of the space required around the components and the positions of
the feet are as follows.

Required Peripheral Space

■ Standard state
Front Surface
1072.9
500
Paper cassette
Output selection cover
Front cover
100
Installation Site
2
(mm)
2-5