IMPORTANT
Match the paper size specified in the SETUP menu of the printer and that specified in the
•
printer driver. If they do not match, the message <PC LOAD "size"> appears. In this
case, the setting value for TRAY PAPER SIZE is changed to that in the printer driver by
pressing the
(Online) key, allowing you to continue printing.
When custom size paper is loaded, specify the setting for TRAY PAPER SIZE as follows.
•
- When the paper is loaded in landscape orientation: CUSTOM SIZE
- When the paper is loaded in portrait orientation: CUSTOM SIZE R
When you change the paper loaded in the multi-purpose tray frequently, it is convenient if
•
TRAY PAPER SIZE is set to MIXED SIZES. If TRAY PAPER SIZE is set to MIXED SIZES,
you do not need to specify the setting for TRAY PAPER SIZE each time you load different
size paper. However, when specifying MIXED SIZES, make sure that the size of the
paper loaded in the multi-purpose tray matches the paper size specified in the printer
driver before printing. If they do not match, the printer may stop printing, displaying the
message <41 CHK PAPER SZE>, or a paper jam may occur. Be sure to check if the
paper size specified in the printer driver matches the size of the paper loaded in the
multi-purpose tray before using the printer.
When printing custom size paper from UFR II Printer Driver, you can load the paper
•
either in portrait or landscape orientation. However, if you want to print custom size paper
of its long edges 215.9 mm or less when TRAY PAPER SIZE is set to MIXED SIZES, load
the paper in landscape orientation. When you are not printing from UFR II Printer Driver,
load the paper in portrait orientation.
NOTE
The names of the following paper sizes are indicated by an abbreviation.
Legal: LGL, Letter: LTR, Executive: EXEC, Statement: STMT
1
Press the
SETUP
CONTROL MENU
2
Select FEEDER MENU using [
FEEDER MENU
TRAY PAPER SIZE→
3
Select TRAY PAPER SIZE using [
TRAY PAPER SIZE→
=A4
(Settings) key.
→
] and [ ], then press [OK].
→
→
Loading Paper in the Multi-purpose Tray
] and [ ], then press [OK].
4
4-45