Canon LBP 3370 User Manual page 294

<FM SCALE ERROR>
Cause There is a character in which the number of coordinate points on the
contour lines exceeds the limitation of a pseudo-scalable font.
Remedy Perform "Error Skip", then continue printing. However, the characters with which
an error has occurred are not printed properly.
<PC LOAD "size">
Cause The paper of the size specified in the application is not loaded in the
paper cassette or multi-purpose tray, or the paper source for the different
paper size is selected.
Remedy 1 Load the paper of the size selected in the application (or the one specified by
scaling factors). (See "Loading Paper in the Paper Cassette," on p. 4-17)
Remedy 2 If you are using the multi-purpose tray, check TRAY PAPER SIZE, and when the
paper size does not match the size specified in the application, specify the
setting properly. (See "Loading Paper in the Multi-purpose Tray," on p. 4-33)
Remedy 3 Press the
paper of the matched size is loaded. (See "Selecting a Paper Source," on p.
4-11)
Remedy 4 Press the
you are using the multi-purpose tray, the setting for TRAY PAPER SIZE
automatically changes to the setting specified in the application.
IMPORTANT
If you open the front cover when the message <PC LOAD "size"> is displayed, the
message may disappear. However, be sure to follow the directions in the displayed
message to change the paper.
(Feeder Selection) key, then select the paper cassette in which the
(Online) key, then print to the currently loaded paper forcibly. If
<Auto Error Skip>
Message List 8-35
8