Canon LBP 3370 User Manual page 293

D9 IMG.DATA ERR.
Cause
Remedy
D9 IMG.REFER.ERR
Cause
Remedy
<D9 nn ERROR> ("nn" represents two-digit alphanumeric characters)
Cause
Remedy
<F9-nn PWR OFF>ON> ("nn" represents two-digit alphanumeric characters)
Cause
Remedy
8
<FF FONT FULL>
Cause
Remedy
<FM SIZE ERROR>
Cause
Remedy
8-34 Message List
Data which this printer cannot process is included in TIFF data or JPEG
data.
This printer cannot print the data. Press the
Data which this printer cannot process is included in TIFF data.
This printer cannot print the data. Press the
A problem has occurred and the printer does not operate properly.
Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
A problem has occurred while the printer is processing print data.
Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
Because of too many fonts to be registered, the field (font table) for
registering font information has run out and overflowed.
The printer continues printing by pressing the
page with which an error has occurred is not printed properly.
There is some font with its size exceeds the pseudo-scalable font size.
Perform "Error Skip", then continue printing. However, the characters with which
an error has occurred are not printed properly.
(Online) key to cancel the job.
(Online) key to cancel the job.
<Auto Error Skip>
(Online) key. However, the
<Auto Error Skip>