Table of Contents
Advertisement
6
6-30
SETUP Menu Settings
*3 WSD BROWSING is displayed only when WSD PRINT is set to OFF.
Specifies the TCP/IP setting for the print server equipped with this printer.
Item
Select the method for setting the IP address.
- When specifying the IP address using any one of DHCP,
IP MODE
BOOTP, or RARP, select AUTO.
- When specifying the IP address to the printer directly, select
MANUAL.
If you have set IP MODE to AUTO, select which protocol you
want to use.
PROTOCOL
Set each of DHCP, BOOTP, and RARP to ON (use) or OFF (do
not use).
Specify the settings for IP ADDRESS, SUBNET MASK, and
GATEWAY ADDRESS.
IP SETTINGS
For the method for entering the addresses, see "Method for
entering addresses" below the table.
Setting
Advertisement
Table of Contents
Troubleshooting
