Align The Paper Guides With Both Sides Of The Stack - Canon LBP 3370 User Manual

4
7
4-38 Loading Paper in the Multi-purpose Tray
CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
IMPORTANT
The multi-purpose tray can be loaded with up to the number of sheets listed below.
•
Make sure that the paper stack does not exceed the load limit guides.
- Plain paper (Ex. 80 g/m
- Heavy paper (Ex. 91 g/m
- Heavy paper (Ex. 128 g/m
- Transparency
- Label
- Index Card
Load the paper so that it is straight.
•
If the rear edge of the paper stack is not properly aligned, it may result in misfeeds
•
or paper jams.
If the paper is curled or folded at corners, flatten it before loading it in the printer.
•
If you use paper that has been poorly cut, multiple sheets of paper may be fed at
•
once. In this case, align the edges of the stack on a hard, flat surface.
When printing custom size paper from UFR II Printer Driver, you can load the paper
•
either in portrait or landscape orientation. However, if you want to print custom size
paper of its long edges 215.9 mm or less when TRAY PAPER SIZE is set to MIXED
SIZES, load the paper in landscape orientation. When you are not printing from
UFR II Printer Driver, load the paper in portrait orientation.
NOTE
To print paper with letterheads or logos, see "Paper Loading Orientation" (p. 4-51)
and load the paper in the proper orientation.

Align the paper guides with both sides of the stack.

2
) : Approx. 50 sheets
2
) : Approx. 40 sheets
2
) : Approx. 25 sheets
: Approx. 40 sheets
: Approx. 20 sheets
: Approx. 15 sheets