Canon LBP 3370 User Manual page 292

<D7 nn ERROR> ("nn" represents two-digit alphanumeric characters)
Cause A problem has occurred and the printer does not operate properly.
Remedy Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
<D8 LAYOUT ERROR>
Cause The page cannot be laid out because the memory has run out.
Remedy 1 Set [Graphics Mode] in UFR II Printer Driver to [Raster Mode], then print again.
(See Help of UFR II Printer Driver)
Remedy 2 After performing a soft reset using the RESET menu, perform a hard reset to
increase the free memory space or cycle the power of the printer, and then print
again. (Be aware that all the data in the memory that the printer has received
will be deleted.)
Remedy 3 Perform "Error Skip", then continue printing. However, the data with which an
error has occurred is not printed properly.
<D8 VERSION ERROR>
Cause You tried to print from a printer driver that is not for LBP3370.
Remedy Print from the printer driver for LBP3370.
<D8 SYNTAX ERROR>
Cause Invalid data is sent when printing using UFR II Printer Driver.
Remedy 1 Press the
page with which an error has occurred and its subsequent pages are not
printed.
Remedy 2 Confirm the data to be printed, then print again.
<D8 nn ERROR> ("nn" represents two-digit alphanumeric characters)
Cause A problem has occurred and the printer does not operate properly.
Remedy Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
(Online) key to continue printing from the next data. However, the
Message List 8-33
8