Paper Jams
When a paper jam occurs during printing for some reason, the printer beeps,
displaying the message <13 PAPER JAM> in the display. When a paper jam occurs,
remove the jammed paper using the following procedure, and then resume the job.
If the message that indicates the paper jam does not disappear even after removing
the jammed paper following the procedure, there is a possibility that torn pieces of
paper are still left inside the printer. Inspect each part of the printer again, and
completely remove all pieces of jammed paper.
Precautions on Clearing Paper Jams
WARNING
There are some areas inside the printer which are subject to high-voltages.
When removing jammed paper or when inspecting the inside of the printer, do
not allow necklaces, bracelets, or other metal objects to touch the inside of the
printer, as this may result in burns or electrical shock.
CAUTION
The fixing unit and its surroundings inside the printer are hot during use. Make
•
sure the fixing unit is completely cool before removing the jammed paper.
8
Touching the fixing unit when it is still hot may result in burns.
The face-up output slot and its surroundings become hot during or immediately
•
after using the printer. Do not touch the face-up output slot and its
surroundings, as doing so may result in burns.
The paper may be hot immediately after being output. Be careful when removing
•
the paper as well as when aligning the removed paper, especially after printing
continuously. Otherwise, this may result in burns.
8-4
Paper Jams