Canon LBP 3370 User Manual page 128

When custom size paper is loaded, specify the settings for CASSETTE1 SIZE and/or
•
CASSETTE2 SIZE as follows.
- When the paper is loaded in landscape orientation: CUSTOM SIZE
- When the paper is loaded in portrait orientation: CUSTOM SIZE R
When you change the paper loaded in the paper cassette frequently, it is convenient if
•
you set CASSETTE1 SIZE and/or CASSETTE2 SIZE to MIXED SIZES. When
CASSETTE1 SIZE and/or CASSETTE2 SIZE is set to MIXED SIZES, you do not need to
specify the settings for CASSETTE1 SIZE and/or CASSETTE2 SIZE each time the
different size paper is loaded. However, when specifying MIXED SIZES, make sure that
the size of the loaded paper matches the paper size specified in the printer driver before
printing. If they do not match, the printer may stop printing, displaying the message <41
CHK PAPER SZE>, or a paper jam may occur. Be sure to check if the paper size
specified in the printer driver matches the size of the paper loaded in the paper cassette
before using the printer.
When printing custom size paper from UFR II Printer Driver, you can load the paper
•
either in portrait or landscape orientation. However, if you want to print custom size paper
of its long edges 215.9 mm or less when CASSETTE1 SIZE and/or CASSETTE2 SIZE is
set to MIXED SIZES, load the paper in landscape orientation. When you are not printing
from UFR II Printer Driver, load the paper in portrait orientation.
NOTE
The names of the following paper sizes are indicated by an abbreviation.
Legal: LGL, Letter: LTR, Executive: EXEC
1
Press the
SETUP
CONTROL MENU
2
Select FEEDER MENU using [
FEEDER MENU
TRAY PAPER SIZE→
3
Select CASSETTE1 SIZE or CASSETTE2 SIZE using [
[ ], then press [OK].
CASSETTE1 SIZE →
=A4
(Settings) key.
→
] and [ ], then press [OK].
→
→
Loading Paper in the Paper Cassette
4
] and
4-31