Upnp™ On Windows Xp Systems - THOMSON SpeedTouch 516 Setup And User Manual

5.3 UPnP™ on Windows XP Systems
Adding UPnP™
E-DOC-CTC-20040907-0001 v1.0
If you are running Microsoft Windows XP, it is recommended to add the UPnP™
component to your system.
Proceed as follows:
1
On the Start menu, click Control Panel.
2
The Control Panel window appears. Click Add or Remove Programs.
3
The Add or Remove Programs window appears. Click Add/Remove Windows
Components.
4
The Windows Components Wizard appears:
Select Networking Services in the Components list and click Details.
5
The Networking Services window appears:
Select Universal Plug and Play and click OK.
6
Click Next to start the installation and follow the instructions in the Windows
Components Wizard.
7
At the end of the procedure the wizard prompts you that the installation was
successful. Click Finish to quit.
For more information on UPnP™ and SpeedTouch™ UPnP™ features go to the
UPnP™ pages at the SpeedTouch™ web site:
www.speedtouch.com
Chapter 5
Support
75