THOMSON SpeedTouch 516 Setup And User Manual page 23

The configuration
procedure
E-DOC-CTC-20040907-0001 v1.0
9
To continue with the configuration of your SpeedTouch™ and your PC,
proceed with the configuration procedure described below.
The Configuration procedure proceeds as follows:
1
Once the SpeedTouch™ Setup wizard has detected your SpeedTouch™
device, you can proceed with the configuration procedure.
If more than one SpeedTouch™ device is listed, select the appropriate one.
Then, click Next to proceed.
If the SpeedTouch™ has been configured before:
It may be protected by a system password. You must provide
this password before you can view the device details or continue
with the configuration.
You will be asked to choose between reconfiguring your
SpeedTouch™ or changing your Local Area Network
configuration.
Select the Reconfigure the SpeedTouch™ option and click Next.
2
The following window invites you to select the appropriate connection profile
for your Internet connectivity:
Select the connection profile of your choice and click Next to continue.
If the Service Provider has included a separate disk with a dedicated
connection profile, click Have Disk to navigate to the location of the
appropriate connection profile file.
3
Subsequent screens will guide you through the configuration setup of both
your SpeedTouch™ and/or your PC. Follow the instructions and enter the
required information where needed. This information should be provided by
your Service Provider.
4
In a final step all configurations will be applied to the SpeedTouch™ and your
PC. You can follow the configuration progress in following window:
Chapter 1
SpeedTouch™ Installation
21