THOMSON SpeedTouch 516 Setup And User Manual page 59

System
System Password
E-DOC-CTC-20040907-0001 v1.0
Click this link to display the Configuration page.
This page allows you to:
Back up the current SpeedTouch™ configuration, restore the SpeedTouch™
default configuration, or upload a saved configuration file:
To backup the current configuration, click
To restore the SpeedTouch™ defaults, click
configuration.
To upload and apply a SpeedTouch™ configuration file you've previously
backed up, click Browse to go to the location where the SpeedTouch™
configuration file resides. Select the configuration file and click
upload and apply the new configuration.
View the current system software version, file name and the SpeedTouch™
board type:
Check for the latest SpeedTouch™ software upgrades.
Click this link to display the System Password page.
This page allows you to configure a system password to restrict access to the
SpeedTouch™:
It is highly recommended that you configure a system password. To protect the
SpeedTouch™ you should change the System password on a regular basis.
However, never use an obvious password such as your name, date of birth, etc.
Enter User id and System password of your choice and re-enter your password in
the appropriate field. Click Apply to apply the System password and
your changes to persistent memory.
SpeedTouch™ Web Interface
Backup and follow the instructions.
Restore default to load the default
Upload
Save all
Chapter 3
to
to save
57