Chapter 1
SpeedTouch™ Installation
1.3.1 Configuration Setup for Microsoft Windows
Microsoft Windows
The SpeedTouch™
Setup wizard
The detection
procedure
18
Operating Systems
One of the following Windows operating systems must already be installed on your
PC(s):
Windows 98SE
Windows ME
Windows NT4.0 SP6 (Ethernet only)
Windows 2000
Windows XP
You may need the Windows installation CD-ROM during installation.
The SpeedTouch™ Setup wizard procedure consists of two major parts:
The detection procedure
The configuration procedure
Additional configuration (if needed)
The detection procedure proceeds as follows:
1
Insert the SpeedTouch™ Setup CD-ROM in your PC's CD-ROM drive. The
SpeedTouch™ CD Browser will start automatically.
If the SpeedTouch™ CD Browser window does not appear
automatically, open a Run window via Start > Run from the Start
menu and enter the following path: D:\Menu.exe, where D stands for
the drive letter of your CD-ROM drive.
2
The Choose Language window prompts you to select a language:
Select the language of your choice and click OK.
3
The SpeedTouch™ CD Browser appears:
Click Initial Setup.
E-DOC-CTC-20040907-0001 v1.0