Speedtouch™ Napt Manager - THOMSON SpeedTouch 516 Setup And User Manual

4 SpeedTouch™ NAPT Manager
Introduction
Using SpeedTouch™
NAPT Manager
E-DOC-CTC-20040907-0001 v1.0
The SpeedTouch™ NAPT Manager allows you to add static NAT entries for specific
applications.
To add a static NAPT entry using SpeedTouch™ NAPT Manager:
1
Insert the SpeedTouch™ Setup CD-ROM in your computer's CD-ROM drive.
The SpeedTouch™ CD Browser will start automatically.
If the SpeedTouch™ CD Browser window does not appear
automatically, click Run on the Start menu and enter the following
path: D:\Menu.exe where D stands for the drive letter of your CD-ROM
drive.
2
The SpeedTouch™ Menu appears:
Click Configuration.
3
The following window appears:
Click Configure NAPT Settings.
Chapter 4
SpeedTouch™ NAPT Manager
59