E-DOC-CTC-20040907-0001 v1.0
4
The SpeedTouch™ Setup Wizard should find your SpeedTouch™ device on
the local network. This is indicated by the following window:
If more than one device is found, a list of available devices will be provided. If
this is the case, select your SpeedTouch™ device (SpeedTouch™516) and click
Next.
If the wizard does not find any SpeedTouch™ on the network an error
window appears. In this case check page
5
To repeat the search for your SpeedTouch™, click Back and proceed with step
3
of this procedure.
6
Click Next.
7
The following window shows the system software version currently active on
the SpeedTouch™ as well as one or more system software versions available
on the CD:
Select the appropriate system software version and click Next to continue.
If the Service Provider has included a separate disk with dedicated
upgrade system software, click Have Disk to navigate to the location of
the appropriate file.
In case of a system software downgrade you must specifically
acknowledge your decision before being able to proceed.
Chapter 5
20
for more information.
69
Support