Upnp™ On Windows Xp Systems - THOMSON SpeedTouch 716v5 (WL) User Manual

Chapter 7
Troubleshooting
SpeedTouch™ not
detected by UPnP™ or
IGD Control Client
Adding UPnP™
126
7.2 UPnP™ on Windows XP Systems
Check on following:
Make sure the UPnP™ and Internet Gateway Device Control Client Networking
components are added to your MS Windows XP system.
Your computer doesn't support UPnP™ if you run an operating system other
than MS Windows XP and MS Windows Millennium.
Make sure that UPnP™ is not disabled in the SpeedTouch™ web page; see
"5.5.4 Game & Application Sharing" on page
If you are running Microsoft Windows XP, it is recommended to add the UPnP™
component to your system.
Proceed as follows:
On the Start menu, click (Settings >) Control Panel.
1
The Control Panel window appears. Click Add or Remove Programs.
2
In the Add or Remove Programs window appears, click Add/Remove
3
Windows Components.
In the Windows Components Wizard, select Networking Services in the
4
Components list and click Details.
In the Networking Services window, select Universal Plug and Play or UPnP
5
User Interface and click OK.
Click Next to start the installation and follow the instructions in the Windows
6
Components Wizard.
At the end of the procedure the wizard prompts you that the installation was
7
successful. Click Finish to quit.
85.
E-DOC-CTC-20050401-0008 v1.0