THOMSON SpeedTouch 516 Setup And User Manual page 26

Chapter 1
SpeedTouch™ Installation
Configuration of the
SpeedTouch™
24
Proceed as follows:
1
Open a web browser and browse to the SpeedTouch™ web pages at
http://10.0.0.138. See
information.
If you can not access the SpeedTouch™ web pages, it is probably not
in its default state. It is recommended to reset the device. See
"5.2 SpeedTouch™ Default Configuration" on page 74
information.
2
The embedded Easy Setup
Click Next.
If Easy Setup
Advanced > Easy Setup.
3
The following window invites you to select the appropriate Service for your
internet connectivity:
In the Service list, select the Service as specified by your Service Provider and
click Next to continue.
If only one Service is available, this window will not be shown.
4
Subsequent screens will guide you through the configuration setup of the
SpeedTouch™. Follow the instructions and enter the required information
whenever needed. The requested information will depend on the selected
Service profile and should be provided by your Service Provider.
Click Next whenever requested.
"3 SpeedTouch™ Web Interface" on page 41
wizard will appear automatically:
doesn't start automatically go to
for more
for more
E-DOC-CTC-20040907-0001 v1.0