THOMSON SpeedTouch 516 Setup And User Manual page 69

On Mac OS X
E-DOC-CTC-20040907-0001 v1.0
Proceed as follows:
1
Insert the SpeedTouch™ Setup CD in your PC's CD-ROM drive.
2
Open the CD and browse to the osx folder.
3
In the osx folder double-click upgradeST.pkg to install the SpeedTouch™
Upgrade application.
The installation wizard may prompt you for authentication. If this is
the case, click
If your computer runs Mac OS X v10.3, your computer may prompt
you to run a program to determine if the installer package can be
installed. If this the case, click Continue.
4
After installation go to the Applications > SpeedTouch folder on the system
startup disk (usually the location where you installed the SpeedTouch™
Upgrade application) and double-click upgradeST to start the
SpeedTouch™ Upgrade Wizard.
5
The Choose Language window prompts you to select a language.
Select the language of your choice and click OK.
The selected language will also be used as default language in the
SpeedTouch™ web pages. See
information on how to change the web page language.
See " Upgrade procedure" on page 68
to enter your credentials.
" Language" on page 58
to continue.
Chapter 5
Support
for more
67