THOMSON SpeedTouch 516 Setup And User Manual page 79

Adding Internet
Gateway Device
Discovery and Control
E-DOC-CTC-20040907-0001 v1.0
Your MS Windows XP system is able to discover and control Internet Gateway
Devices (IGD), like the SpeedTouch™ on your local network. Therefore it is
recommended to add the IGD Discovery and Control client to your system.
Proceed as follows:
1
On the Start menu, click Control Panel.
2
The Control Panel window appears. Click Add or Remove Programs.
3
The Add or Remove Programs window appears. Click Add/Remove Windows
Components.
4
The Windows Components Wizard appears:
Select Networking Services in the Components list and click Details.
5
The Networking Services window appears:
Select Internet Gateway Device Discovery and Control Client and click OK.
6
Click Next to start the installation and follow the instructions in the Windows
Components Wizard.
7
At the end of the procedure the wizard prompts you that the installation was
successful. Click Finish to quit.
Chapter 5
Support
77