THOMSON SpeedTouch 516 Setup And User Manual page 24

Chapter 1
SpeedTouch™ Installation
Additional configuration
22
5
The SpeedTouch™ Setup wizard will appear again to announce that the
configuration has been successful:
Click Finish to close the wizard.
In some cases, the SpeedTouch™ Setup Wizard may ask you to restart
your computer. First close all your programs and then click Yes. If you
want to reboot later click NO:
Most configuration profiles will enable SpeedTouch™'s DHCP server - and a PC's
Ethernet port is configured as DHCP client by default. Therefore, in most cases, no
additional configuration of your PCs must be done if you want to enable multiple
PCs on your local network for accessing the Internet via the SpeedTouch™.
To make sure that all PCs are configured as expected (DHCP or fixed IP addresses)
you can re-run the SpeedTouch™ Setup wizard on every PC and select the Change
the LAN configuration option.
For fixed IP configurations, or other advanced settings, please follow the
instructions provided by your ISP or network administrator.
E-DOC-CTC-20040907-0001 v1.0