Chapter 1
SpeedTouch™ Installation
Verifying USB
connectivity
Connecting to the
16
9
At the end of the procedure, the following window appears:
Click Finish to complete the installation.
10
As a result your USB connection is installed and ready for use.
The SpeedTouch™ USB connection is represented as a local network interface. You
can easily check this interface by opening the Network Connections window from
Windows' Control Panel:
To continue with preparing the SpeedTouch™ for internet connectivity, see
Internet
"1.3 SpeedTouch™ Configuration Setup" on page
17.
E-DOC-CTC-20040907-0001 v1.0