THOMSON SpeedTouch 516 Setup And User Manual page 51

IP Addresses
E-DOC-CTC-20040907-0001 v1.0
Click this link to display the IP Addresses page.
This page allows you to view or add/delete specific IP address entries for
SpeedTouch™'s interfaces:
To add an IP address for one of the SpeedTouch™ interfaces:
1
Click New.
2
Select the interface to which the IP address applies (use eth0 for assigning to
the SpeedTouch™ Ethernet interface).
3
Provide IP address and (sub)netmask in IP prefix notation (e.g. 192.6.11.150/
24) or select Obtain an IP address automatically for assigning a dynamic IP
address to the interface.
4
Optionally select NAPT in case you want to enable address translation on this
IP address.
5
Click Apply
6
Click Save all to save your changes to persistent memory.
Chapter 3
SpeedTouch™ Web Interface
49