Chapter 1
SpeedTouch™ Installation
20
7
The Setup wizard will start to search for the SpeedTouch™ on the network.
The following window shows the detection progress:
A Windows Security Alert window may prompt you that Windows has
!
blocked some features of the SpeedTouch™ Setup wizard:
Click Unblock to allow the SpeedTouch™ Setup wizard to access the
local network.
8
The Setup wizard should find your SpeedTouch™ device on the local network.
This is indicated by the following window:
In case more than one SpeedTouch™ device is found, a listing is provided
from which you can select your SpeedTouch™.
If the Setup wizard does not find any SpeedTouch™ on the network an
error window pops up. In this case check:
Whether the SpeedTouch™ is turned on and fully initialized.
Whether your PC is correctly connected to the SpeedTouch™
(Ethernet or USB).
Whether no dedicated firewall device or router is placed between
your PC and the SpeedTouch™ and whether no personal firewall
software is running on your PC (in case of Ethernet connectivity).
Whether the SpeedTouch™ USB drivers are correctly and fully
installed (in case of USB connectivity).
To repeat the search for the SpeedTouch™, click Back and proceed with step
of this procedure.
7
E-DOC-CTC-20040907-0001 v1.0