Cwmp Service Manager - THOMSON TR-069 Configuration Manual

2| Configuring CWMP on the Thomson Gateway
2.2.1

CWMP Service Manager

Introduction
CWMP services consist of two services:
CWMP-C: the CWMP client service. The CWMP client is responsible for establishing connections to the
ACS and for sending Inform RPCs. The CWMP client has a state machine to track RPCs and report their
result (for example via a TransferComplete RPC).
CWMP-S: the CWMP connection request server service. The CWMP connection request server listens on
a TCP port for connection requests, performs HTTP authentication and triggers the CWMP client to
establish a connection to the ACS.
CWMP client
To display the attribute values of the CWMP client service, execute following command:
=>:service system list name=CWMP-C expand=enabled
Idx Name
---------------------------------------------------------------------------------
1 CWMP-C
Description................ CPE Wan Management Protocol Client
Properties................. client
Attributes................. state port srcip qoslabel routelabel
User Managed
Attribute Values :
State...................... (administratively) disabled
Port....................... 0
Source Ip Selection........ auto
QOS Label.................. Management
Route Label................ None
You can configure the value of following attributes:
State: by default, the CWMP client service is disabled.
To enable the service, execute following command:
=>:service system modify name=CWMP-C state=enabled
Qoslabel: the Thomson Gateway supports application-based QoS label assignment. If the value of this
attribute differs from
QoS label determines the internal QoS class of the data.
To assign a specific QoS label to all data, for example the label "Interactive", execute following
command:
=>:service system modify name=CWMP-C qoslabel=Interactive
Routelabel: the Thomson Gateway supports application-based Route label assignment. If the value of
this attribute differs from
This route label can be used for IP forwarding. This enables forwarding all CWMP traffic over a particular
IP interface.
To assign a specific route label to all data, for example the label "Interactive", execute following
command:
=>:service system modify name=CWMP-C routelabel=Interactive
E-DOC-CTC-20071119-0003 v1.0
Protocol SrcPort
tcp
Attributes..... state qoslabel routelabel
none
, all CWMP client originated data automatically has a QoS label assigned. This
none
, all CWMP client originated data automatically has a route label assigned.
DstPort Group
19