Table of Contents
Advertisement
2 GE ports
6
The GE ports can provide high-bandwidth uplinks between the Alcatel
Wireless LAN Switch and the wired LAN. The GE port sockets accept a variety
of Gigabit Interface Converters (GBICs) for versatility in selecting optical and
electrical interfaces. See
Each GE port has its own LNK/ACT LED, located to the right of the port.
During operation, these LEDs provide the following status information:
T
ABLE
Status
Off
Green
Flashing
Green
Amber
Port & Cable Specifications
FE Ports
There are two models of Alcatel 6000-series Line Card, each with different
port characteristics:
The Alcatel 6000-series Line Card (OAW-LC-2G24F) has 24 FE ports
The FE ports provide 10/100 Mbps Ethernet connections to APs and wired LAN
segments. No power or serial connectivity is provided by the ports on this line
card.
The Alcatel 6000-series SPOE Line Card (OAW-LC-2G24FP) has 24
FE+SPOE ports.
When connected directly to an IEEE 802.3af POE compatible device, the port
will provide power and data connectivity through the same cable. For devices
that support compatible serial wiring or include an appropriate serial breakout
adapter, such as the Alcatel Wireless Access Point, the port will provide serial
connectivity as well as power and data.
N
—Each FE+SPOE line card increases the total power load of the Alcatel Wireless
OTE
LAN Switch. See
their power requirements.
page 52
for port and cable specifications.
7-5 GE LNK/ACT LED
Description
No Ethernet link on the port.
An Ethernet link has been established on the port, but no
data is currently being transmitted or received.
The port is transmitting or receiving data. The flashing rate is
proportional to your network activity.
The Ethernet link on the port is encountering errors.
"Power Management"
on
page 27
to verify your systems meet
Chapter 7
The Line Cards
49
Advertisement
Table of Contents
