Table of Contents
Advertisement
Indicator LEDs
3
T
ABLE
LED
Power
Status
Active/Stan
dby
4
PCMCIA Drive
The PCMCIA drive accepts PCMCIA type II cards. The card may contain a
default image and initial boot configurations. It can also be used to upgrade
the software in the Alcatel Wireless LAN Switch.
The LED to the immediate right of the drive provides the following PCMCIA
status information:
T
ABLE
Status
Description
Off
The drive is not in use or power is off.
Green
The drive is accessing an inserted PCMCIA type II card.
To eject a card, press the ejector button located at the right-hand side of the
drive.
6-1 Supervisor Card LEDs
State
Description
Green
Module is receiving proper DC power.
Off
Module is powered off.
Green
Module has booted and is functioning
properly.
Off
Module is loading software.
Amber
Module has loaded software and is
initializing.
Red
Module has failed.
Green
Module is in active mode.
Amber
Module is in standby mode.
Off
Module has not yet determined an
operating mode.
6-2 PCMCIA Drive LED
Chapter 6
The Supervisor Card
37
Advertisement
Table of Contents
