Table of Contents
Advertisement
OmniAccess 6000: Installation Guide
Precautions
C
—Dangerous voltage in excess of 240VAC is always present
AUTION
while the Alcatel Power Supply Module is plugged into an electrical
outlet. Remove all rings, jewelry, and other potentially conductive
material before working with this product.
Never insert foreign objects into the chassis, the power supply, or any
other component, even when the power supplies have been turned
off, unplugged, or removed.
Main power is fully disconnected from the Alcatel Wireless LAN
Switch by unplugging all installed power supplies' power cords from
their power outlets. For safety reasons, verify the power outlets and
plugs are within easy reach of the operator.
Do not handle electrical cables which are not insulated. This includes
any network cables.
To minimize electrical hazard, keep water and other fluids away from
the product.
Comply with electrical grounding standards during all phases of
installation and operation of the product. Do not allow the Alcatel
Wireless LAN Switch chassis, network ports, power supplies, or
mounting brackets to contact any device, cable, object, or person
attached to a different electrical ground. Also, never connect the
device to external storm grounding sources.
Installation or removal of the chassis or any module must be
performed in a static-free environment. The proper use of anti-static
body straps and mats is strongly recommended.
Modules must be kept in anti-static packaging when not installed in
the chassis.
Do not ship or store this product near strong electromagnetic,
electrostatic, magnetic or radioactive fields.
Do not disassemble the chassis or any module. They have no internal
user-serviceable parts. When service or repair is needed, see
"Contacting Alcatel"
on
page
xiii.
6
Part 031639-00
May 2005
Advertisement
Table of Contents
