Chapter 4 Configuring Learned Port Security; Learned Port Security Specifications; Learned Port Security Defaults - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Learned Port Security Specifications

Learned Port Security Specifications
RFCs supported
IEEE Standards supported
Ports eligible for Learned Port Security
Ports not eligible for Learned Port Security
Minimum number of learned MAC addresses
allowed per port
Maximum number of learned MAC addresses
allowed per port
Maximum number of configurable MAC address
ranges per LPS port
Maximum number of learned MAC addresses per
switch

Learned Port Security Defaults

Parameter Description
LPS status for a port.
Number of learned MAC addresses
allowed on an LPS port.
Maximum number of filtered MAC
addresses that the LPS port can
learn.
Source learning time limit.
Configured MAC addresses per LPS
port.
MAC address range per LPS port.
LPS port violation mode.
Number of bridged MAC addresses
learned before a trap is sent.
page 3-2
Not applicable at this time.
Not applicable at this time.
Ethernet and gigabit Ethernet ports (fixed, mobile,
802.1Q tagged, and authenticated ports).
Link aggregate ports.
802.1Q (trunked) link aggregate ports.
1
100
1
16K
Command
port-security
port-security maximum
port-security max-filtering
port-security shutdown
port-security mac
port-security mac-range
port-security violation
port-security learn-trap-
threshold
OmniSwitch 6800/6850/9000 Network Configuration Guide
Configuring Learned Port Security
Default
disabled
1
5
disabled
none
00:00:00:00:00:00–
ff:ff:ff:ff:ff:ff
restrict
5
March 2008