Table of Contents
Advertisement
C
HAPTER
The Power Supply
The Alcatel 6000-series Power Supply adapts electrical power for
use with the Alcatel Wireless LAN Switch. The switch chassis
has multiple slots that can hold individual power supplies to
support load sharing and fault tolerance.
This chapter describes the general features and physical
characteristics of the power supply. It also covers important
power consumption management information and includes a
Power Supply Management Worksheet. The final sections of the
chapter cover the steps required to insert and remove power
supplies.
Features
Rating
There are two different power supplies available for the Alcatel
6000-series Wireless LAN Switch
The standard 200 W Power Supply (OWA-6000-PS200)
This standard power supply is rated at 200 W total output and is
auto-ranging to accept 90-135/ 170-264 VAC, at 50 to 60 Hz. Up
to two 200 W power supplies can be installed in the Alcatel
Wireless LAN Switch in power supply slots 1 and 3 only.
N
OTE
slot 2.
The optional 400 W Power Supply (OWA-6000-PS400)
This optional power supply is rated at 400 W total output and is
auto-ranging to accept 85 to 264 VAC, at 50 to 60 Hz. Up to three
400 W power supplies can be installed in the Alcatel Wireless
LAN Switch.
5
—The 200 W power supply cannot be installed in power supply
The Power Supply
23
Advertisement
Table of Contents
