Physical Description - Alcatel-Lucent OMNIACCESS 6000 Installation Manual

OmniAccess 6000: Installation Guide
All modules are hot-swappable by trained technicians.

Physical Description

4
Module
Handles
5
F
System
N —Figure 1-1 depicts an Alcatel Wireless LAN Switch with the minimum
OTE
components required for operation. Depending on the options selected when
your system was purchased, your actual chassis may include more or fewer
of the pictured items. Cover unused slots with blank plates.
0
Slot 0
This slot is for the required supervisor card. The supervisor card processes all
traffic from the line cards and performs all management functions.
1 Slot 1
This is a dual-purpose slot. It can be used for a second, optional supervisor
card to provide redundancy for extra processing capacity or fault tolerance.
Alternately, this slot can be used for a third line card to provide extra network
port capacity.
2
Slot 2
This slot is for the required line card. The line card provides network ports for
connecting wireless APs, such as the Alcatel Wireless Access Point, as well as
wired LAN segments.
2 Part 031639-00
Card Slots
6
Mount Fan Tray
Holes Slot
1-1 Alcatel 6000-series Wireless LAN Switch
IGURE
0 1 2 3
7
Power Supply Slots
May 2005
5
Mount
Holes