Table of Contents
Advertisement
Slot 3
3
This slot is for adding a second line card.
4
Module Handles
All module handles are used only for removing and inserting the individual
modules.
C
AUTION
Wireless LAN Switch chassis. Using the handles to support the
chassis can result in serious damage to both the module and the
chassis.
5
Holes for attaching rack mounting brackets (on side)
6
Fan Tray Slot
The Alcatel Wireless LAN Switch is cooled by a hot-swappable fan tray. The
fan tray pulls air from right to left (as viewed from the front of the chassis)
across the installed cards.
During operation, the air vents on the left and right sides of the chassis must
remain unobstructed by cables or mounting equipment. For proper air
circulation, leave at least 10 cm (4 inches) of clearance on the left and right of
the chassis.
7
Power Supply Slots
The chassis has slots for up to three power supplies. The number and type of
power supplies required for your system depends on the number and type of
line cards installed, and whether you wish to include redundancy for fault
tolerance. See
"Power Management"
Each power supply has its own power cord and power switch.
C
AUTION
switch is in the On (|) position or while the power cord is plugged in.
First verify the power switch is Off ( ) and the cord is unplugged.
C
AUTION
precautions when handling Alcatel 6000-series components.
—Never use the module handles to lift or move the Alcatel
—Never insert or remove a power supply while its power
—Be sure to exercise proper Electrostatic Discharge (ESD)
on
page 27
for more information.
Chapter 1
System Overview
3
Advertisement
Table of Contents
