Table of Contents
Advertisement
Physical Description
1
POWER
STATUS
LNK/
ACT
3
Alcatel Line Card II Module
1
Module Fastening Screws
2
2 GE ports
Each GE port has its own LNK/ACT LED, located to the right of the port.
During operation, these LEDs provide the following status information:
T
ABLE
Status
Off
Green
Flashing
Green
Amber
For information on connecting the GE ports, see
3
Module Handle
This handle is used for removing or inserting the module into the switch
chassis.
C
AUTION
move the Alcatel Wireless LAN Switch. Serious
damage could result.
4
POE
8 GE LNK/ACT LED
Description
No Ethernet link on the port.
An Ethernet link has been established on the port, but no
data is currently being transmitted or received.
The port is transmitting or receiving data. The flashing rate is
proportional to your network activity.
The Ethernet link on the port is encountering errors.
—Do not use the line card handle to lift or
2
0
1
LNK/
ACT
"Gigabit Ethernet
Chapter 7
1
LNK/
ACT
Ports".
The Line Cards
55
Advertisement
Table of Contents
