Selecting Image Density; Using Auto Exposure; Using Manual Exposure - Bell and Howell ABR2300/AR23 Operator's Manual

SELECTING THE IMAGE DENSITY

Using Auto Exposure

Using Manual Exposure

Press the Exposure Mode Select Button as
required to select the Auto Exposure Mode.
The green LED to the left of the key lights up
when the Auto Exposure mode is selected.
Press the appropriate Exposure Adjustment
Button, either LIGHTER or DARKER, to set the
desired image density, or exposure level.
Press LIGHTER to make the image lighter.
Press DARKER to make the image darker.
When the LIGHTER and DARKER Keys are
pressed simultaneously, the exposure level
reverts to the centre position.
Press the Exposure Mode Select Button as
required to select the Manual Exposure Mode.
The green LED to the left of the key goes out
when the Auto Exposure mode is deselected.
Press the appropriate Exposure Adjustment
Button, either LIGHTER or DARKER, to set the
desired image density, or exposure level.
Press LIGHTER to make the image lighter.
Press DARKER to make the image darker.
When the LIGHTER and DARKER Keys are
pressed simultaneously, the exposure level
reverts to the centre position.
19