4-Speed Operation; 4-Speed • Optional Light Fixture Installation; 4-Speed Optional Wall Control • W-41; 4-Speed • Optional Wall Control • W-81 - Casablanca Panama Owner's Manual

Hide thumbs Also See for Panama:

Owner's manual (17 pages)

Owner's manual and installation manual (2 pages)

Table of Contents

Pull-chain switches on the fan control the fan and lights.

Using the fan control pull-chain switch: fan off at start.

first pull: fan oN, High speed

Second pull: Medium speed

Third pull: Medium Low speed

fourth pull: Low speed

fifth pull: fan off

Using the optional light pull-chain switch: Light off at

start.

first pull: light oN

Second pull: light off

Direction of blade rotation is controlled by the reverse slide

switch on the side of the switch housing.

No changes in household wiring are required.

4-Speed • opTIoNal lIGhT FIXTUre INSTallaTIoN

NoTe: If a separate circuit is used to control the lights from a wall

control, the BLUe D1-option wire in the canopy should be con-

nected to that switch leg.

1. refer to light kit instructions to assemble and attach your light

kit correctly.

2. remove the two 8-32 screws from the switch housing cap.

3. remove the plug from switch housing.

4. Install pull-chain switch and finger tighten collar on switch.

5. Connect one wire from pull-chain switch to the BLUe D1-option

wire. Secure splice with a wire nut.

6. Connect other wire from pull-chain switch to BLaCk wire from light

kit. Secure splice with a wire nut.

7. Connect wHITe wire from switch housing to wHITe wire from light

kit. Secure splice with a wire nut.

8. at the canopy, connect the BLaCk and BLUe wires.

4-Speed opTIoNal wall coNTrol • w-41

The w-41 wall control provides four-speed control of fan from a convenient wall location.

The w-41 is designed to replace a standard wall switch and will fit wall boxes with a depth

of 2" or greater. Not for use with single pull-chain fan/light option wiring.

To install a w-41 wall control in place of an existing wall switch, follow the instructions

on the w-41 package.

Note: No rewiring is required if the fan is replacing an existing light fixture.

operation of the fan from the wall switch is simple:

1. Turn knob to obtain desired speed setting.

CaUTIoN! failure to set the pull-chain speed to HIGH can result in faulty operation of

the fan and damage to the w-41 wall control. To confirm fan is set to HIGH: Turn w-41

fan speed switch to 'HI' - set fastest fan speed with pull chain.

4-Speed • opTIoNal wall coNTrol • w-81

The w-81 wall control provides separate control of fan and light with two separate knobs

from a convenient wall location. The w-81 is designed to replace a standard wall switch

and wall boxes with a depth of 2" or greater. requires two hot leads from wall box to ceil-

ing wiring box.

To install a w-81 wall control in place of an existing

wall switch, follow the instructions on the w-81 package.

operation of the fan from the wall switch is simple:

1. Turn the upper knob to the desired fan speed.

2. Turn the lower knob to the desired light setting.