Scan Width; Scan Offset - Xerox 6279 User Manual

6. Select Save when finished.
TIP
When making copies from a book or other unique originals, black shadows
sometimes appear in the margins on the edge of the paper. If this happens, you
can make copies with the shadows erased.
When Reduce/Enlarge is set up, the border erase amount is proportionately changed.

Scan Width

The Scan Width can be changed from the standard sizes of originals if you wish. Simply
define the new width using the Variable selection.
The factory default is Standard Width Detection.
• Standard Width: This features lets the scanner determine the actual original
documents width.
• Variable Width: This feature allows you to set variable scan widths from 8.2 to 36
inches, in increments of 0.1 inch.
1. Press the Services button on the Control Panel.
The Services menu will display with Scan to Mailbox as an option.
2. Select Scan to Mailbox.
3. Select the Advanced Settings tab
4. Select Scan Width.
5. Select Variable Width when scanning a non-standard width original.
6. Then enter the desired scan width using either the numbers keypad or the scroll
buttons.
7. Select Save when finished.

Scan Offset

When the Scan Offset feature is enabled, and a scan offset position is defined, the
machine will ignore image information from the lead edge to the scan offset position.
This enables you to eliminate unnecessary detail from the lead edge of an original.
The scan offset position can be set up from 0 to 36.0 inches, in 0.1 inch increments.
The factory default is Disabled.
• Disabled: Scan offset will not be applied to the original
• Enabled: A scan offset equivalent to the dimension you specify will be applied to the
original when it is scanned.
1. Press the Services button on the Control Panel.
The Services menu will display with Copy as an option.
2. Select Copy.
3. Select the Advanced Settings tab.
® ®
Xerox 6279 Wide Format Solution
Copy/Scan User Guide
Copying and Printing Documents
2-21