Xerox 6279 User Manual page 208

Appendix
Table 35: Power
Power
Input voltage (controller)
Table 36: Power Consumption
Mode Printer
208-240V 13.2A or less
At Warm-up 3.2 KW or less
Standby Less than 520 W
Running 3 KW or less
Power save 54 W
Sleep 13 W
Table 37: Electrical Requirements
Print engine
FreeFlow Accxes
UI
9-8
Frequency (applied to IOT)
50Hz ± 5% or 60Hz ± 5% (compatible with both 50Hz and 60Hz)
Rated Voltage
IOT: AC 208-240V, -10% to +10% of the rated voltage
Power Cord Receptacles
The IOT will have an IEC-320-20C (Inlet)
Power Source
One 208-240V 20A circuit with 1 receptacle is required.
One dual 115V, 15A outlet for Accxes Controller and UI Power is
required.
One each additional 115V, 15A outlet will be needed to enable an
optional Wide Format Scanner or an optional Stacker.
Voltage selection switch with settings for 115V or 220V
Controller
115V 15A or less
60 W or less
60 W or less
60 W or less
60 W or less
60 W or less
208-240V +/- 10%. 50 - 60 Hz, 13.2 amp
110/220V, 50-60 Hz, 5/2.5 amp max
100/240V, 50-60 Hz, 1.5A converted to 12 VDC, 5 amp max
UI
115V 15A or less
45 W or less
45 W or less
45 W or less
5 W or less
5 W or less
® ®
Xerox 6279 Wide Format Solution
Copy/Scan User Guide