Xerox 6279 User Manual page 13

Table 1: System Components
No. Component
1 User Interface
(consists of #2, 3)
2 Touch screen
3 Control Panel
4 Original Guide
5 Scanner
6 Manual Feed-in Shelf (Bypass)
7 Size Indicator Label
8 Roll 1 and 2 Drawer
9 Roll 3 and 4 Drawer
10 Tray 3 Drawer
11 Tray 4 Drawer
12 Turn Around Guide
13 Upper Unit Release Lever
14 Printer Power Switch
15 Original Thickness Lever
16 Scanner Feed-in Shelf
® ®
Xerox 6279 Wide Format Solution
Copy/Scan User Guide
Function
Also known as the UI, is contained of the Touch Screen
and the Control Panel. This is where the operator will
program jobs and configure the features of the 6279
Wide Format System.
Used to set up copy jobs, map originals to the installed
media, display messages and procedures, and provide
troubleshooting help, e.g., for jam clearance.
Contains selection buttons and copy/print services
access.
Helps the user align the edge of a document when
feeding it into the scanner.
The document glass area where images are scanned.
Used for printing or copying on cut sheet media.
The label used as a guide for aligning originals in the
center for scanning.
A dual-roll media drawer that feeds roll paper.
A dual-roll media drawer that feeds roll paper.
Cut sheet media tray.
Cut sheet media tray.
Assists the original document as it exits the printer.
Lift to open the Upper Unit of the printer and access
jammed media or to open the Waste Toner Bottle Door.
Power to the Printer and UI.
Adjusts for paper thickness from 0-0.5 inch/0-12 mm
(increments of 2 mm).
Documents to be scanned are input here.
Product Overview
1-3