Cleaning The Machine - Xerox 6279 User Manual

Maintenance
9. Firmly push the Upper Unit down until it latches.
NOTE
If you do not attach the Waste Toner Bottle correctly, a message will appear on
the Touch Screen when you close the Upper Unit, and the machine will not come
to a Ready state.

Cleaning the Machine

This section instructs you on how to clean the machine.
Do not use cleaning agents other than water, a neutral detergent, or Xerox Platen Glass,
Lens and Mirror Cleaner.
WARNING
To reduce the risk of electric shock, power off the machine before cleaning.
CAUTION
Do not use benzene, paint thinner, other volatile liquids on the machine. These
substances may discolor, deform, or crack covers.
CAUTION
Cleaning the machine with an excessive amount of water may cause the machine
to malfunction and/or damage documents during printing.
1. Power off the machine as directed in the
2. Gently wipe only the exterior surfaces of the printer with a damp, soft cloth.
NOTE
You may apply a small amount of neutral detergent to the damp cloth to remove
stubborn soiling.
3. Dry the cleaned surfaces with a soft, lint-free cloth.
4. After all cleaned surfaces are dry, power on the machine as directed in the System
Power Procedure section.
7-8
System Power Off Procedure
®
Xerox 6279
section.
®
Wide Format Solution
Copy/Scan User Guide